Bureau of Indian Standards operates the product certification scheme for foreign manufacturers, also known as the Foreign Manufacturer Certification Scheme. Under this scheme, the Bureau of Indian Standards grants a BIS license to foreign manufacturers to use the ISI mark on a product that conforms to an applicable Indian standard.
The scheme is mandatory for notified products and voluntary for other products.
The presence of ISI Mark on a product ensures that it meets the requirements of applicable Indian standards. To use a standard mark, the manufacturer must first obtain BIS certification from the Bureau of Indian Standards which also involves physical on premises audit of the manufacturing facility & product testing setup by BIS auditor. None of the notified products can be manufactured, imported, stored, sold or distributed in India unless it bears the standard mark (ISI Mark).
India Compliance & Testing Laboratories, an experienced BIS consultant firm are here to help you in obtaining BIS FMCS certification with simplicity. Our expert BIS consultants will assist you at every step from product evaluation, testing, factory audit to extensive documentation for the BIS registration.We offer services for Factory Registration, Authorized Indian Representative (AIR Service), Model Inclusion/Deletion, Brand Inclusion, Product Testing, Laboratory Setup, Updations/Changes in Certificate/company information & renewal of License.
| Sr No. | IS No. | Product |
| Cement (any variety of cement manufactured or sold in India) such as | ||
| 1 | IS 12330 | Sulphate Resisting Portland Cement |
| 2 | IS 12600 | Low heat Portland Cement |
| 3 | IS 1489 (Part 1) | Portland Pozzolana Cement-Part1 Fly-ash based |
| 4 | IS 1489 (Part 2) | Portland Pozzolana Cement-Part 2 Calcined clay based |
| 5 | IS 269 | Ordinary Portland Cement |
| 6 | IS 3466 | Masonry Cement |
| 7 | IS 455 | Portland Slag Cement |
| 8 | IS 6452 | High Alumina Cement for Structural use |
| 9 | IS 6909 | Super sulphated cement |
| 10 | IS 8041 | Rapid hardening Portland cement |
| 11 | IS 8042 | White Portland Cement |
| 12 | IS 8043 | Hydrophobic Portland Cement |
| 13 | IS 8229 | Oil well Cement |
| 14 | IS 16415: 2015 | Composite Cement- Specification. |
| 15 | IS 16993: 2018 | Microfine Ordinary Portland Cement- Specification. |
| 16 | IS 15895: 2018 | High Alumina Refractory Cement. |
| Household Electrical goods | ||
| 17 | IS 12640 (Part 1) | Residual current operated circuit breakers for house hold and |
| 18 | IS 12640 (Part 2) | Residual current operated circuit breakers for household and |
| 19 | IS 13010 | AC watt-hour meters, class 0.5, 1 & 2 |
| 20 | IS 13779 | AC static watt-hour meters, class 1 & 2 |
| 21 | IS 14697 | AC static transformer operated watt-hour and VAR-hour meters, |
| 22 | IS 15111 (Part 1 & 2) | Self Ballasted Lamps for General Lighting Services – Part 1 : |
| 23 | IS 302 (Part 2/Sec 3) | Safety of household and similar electrical appliances – Electric iron |
| 24 | IS 302 (Part 2/Sec 201) | Safety of household and similar electrical appliances– Electric immersion water-heaters |
| 25 | IS 302 (Part 2/Sec 202) | Safety of household and similar electrical appliances –Electric stoves |
| 26 | IS 302 (Part 2/Sec 30) | Safety of household and similar electrical appliances-Room heaters |
| 27 | IS 3854 | Switches for domestic and similar purposes |
| 28 | IS 418 | Tungsten filament general service electric lamps (upto100 W ) |
| 29 | IS 694 | PVC insulated cables for working voltages up to and including 1100V |
| 30 | IS 8828 (Since revised as IS/IEC 60898) | Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations |
| 31 | IS 9968 (Part 1) | Elastomer insulated cables (Part.1): For working voltages up to and including1100 V |
| Batteries | ||
| 32 | IS 8144 | Multi-Purpose dry batteries |
| Feeding Bottles | ||
| 33 | IS 14625 | Plastic Feeding Bottles |
| 34 | IS 5168 | Glass Feeding Bottles |
| Oil Pressure Stoves | ||
| 35 | IS 10109 | Oil pressure stove, offset burner type |
| 36 | IS 2787 | Multi-burner oil pressure stoves |
| 37 | IS 1342 | Oil pressure stoves |
| Automobile Accessories | ||
| 38 | IS 13098 | Automotive vehicles –Tubes for pneumatic tyres |
| 39 | IS 15627 | Automotive vehicles– Pneumatic tyres for two and three-wheeled motor vehicles |
| 40 | IS 15633 | Automotive vehicles-Pneumatic tyres for passenger car vehicles– Diagonal and radial ply |
| 41 | IS 15636 | Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply |
| Cylinder, Valves and Regulator | ||
| 42 | IS 14899 | Liquefied petroleum gas containers for automotive use |
| 43 | IS 15100 | Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use |
| 44 | IS 3196 (Part 4) | Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases |
| 45 | IS 3196 (Part 1) | Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG) |
| 46 | IS 3196 (Part 2) | Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG. |
| 47 | IS 3224 | Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders |
| 48 | IS 3745 | Yoke Type Valve Connection for Small Medical Gas Cylinders |
| 49 | IS 7142 | Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity |
| 50 | IS 7285 (Part 1) | Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders |
| 51 | IS 7285 (Part 2) | Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2) |
| 52 | IS 7302 | Valve fittings for gas cylinder valves for use with breathing apparatus |
| 53 | IS 7312 | Welded and seamless steel dissolved acetylene gas cylinders |
| 54 | IS 8737 | Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders |
| 55 | IS 8776 | Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity |
| Medical Equipment | ||
| 56 | IS 9798 | Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures |
| 57 | IS 3055 (Part 1) | Clinical thermometers :Part1 Solid stem type |
| 58 | IS 3055 (Part 2) | Clinical thermometers :Part 2 Enclosed scale type |
| 59 | IS 7620 (Part 1) | Diagnostic Medical X-Ray Equipment |
| Steel and Iron Products | ||
| 60 | IS 1785 (Part 1) : 1983 | Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire |
| 61 | IS 1785 (Part 2) : 1983 | Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire |
| 62 | IS 6003:2010 | Indented wire for Pre-stressed concrete |
| 63 | IS 6006:2014 | Uncoated stress relieved strand for Pre-stressed concrete. |
| 64 | IS 13620:1993 | Fusion bonded epoxy coated reinforcing bars |
| 65 | IS 14268:1995 | Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete. |
| 66 | IS 277:2003 | Galvanized steel sheets ( plain and corrugated). |
| 67 | IS 2002:2009 | Steel plates for pressure vessels for intermediate and high temperature service including boilers. |
| 68 | IS 2041:2009 | Steel plates for pressure vessels used at moderate and low temperature |
| 69 | IS 2830:2012 | Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose |
| 70 | IS 1786:2008 | High strength deformed steel bars and wires for concrete reinforcement |
| 71 | IS 648:2006 | Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) |
| 72 | IS 3024:2015 | Grain oriented electrical steel sheet & strip (CRGO) |
| 73 | IS 15391:2003 | Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification. |
| 74 | IS 2062:2011 | Hot rolled medium and high tensile structural steel |
| 75 | IS 432 : Part 1:1982 | Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars |
| 76 | IS 432 : Part 2:1982 | Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire |
| 77 | IS 513 (Part-1): 2016 | Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose |
| 78 | IS 513(Part-2):2016 | Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel |
| 79 | IS 1079: 2017 | Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification. |
| 80 | IS 1875:1992 | Carbon steel billets, blooms, slabs and bars for forgings. |
| 81 | IS 2879:1998 | Mild steel for metal arc welding electrodes. |
| 82 | IS 3502:2009 | Steel Chequered Plates |
| 83 | IS 5872:1990 | Cold Rolled Steel Strips (Box Strappings). |
| 84 | IS 5986: 2017 | Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification. |
| 85 | IS 6240:2008 | Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders |
| 86 | IS 7283:1992 | Hot Rolled bars for production of bright bars and machined parts for engineering applications. |
| 87 | IS 7887:1992 | Mild steel wire rods for general engineering purposes. |
| 88 | IS 10748:2004 | Hot Rolled Steel Strip for Welded Tubes and Pipes. |
| 89 | IS 11513:2017 | Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification |
| 90 | IS 15647:2006 | Hot rolled steel narrow width strip for welded tubes and pipes |
| 91 | IS 7904:2017 | High carbon steel wire rods- Specification |
| 92 | IS 14246:2013 | Continuously pre-painted galvanized steel sheets and coils |
| 93 | IS 15965:2012 | Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain). |
| 94 | IS 280: 2006 | Mild steel wire for General Engineering purposes. |
| 95 | IS 1835:1976 | Round Steel wire for ropes |
| 96 | IS 3975:1999 | Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables |
| 97 | IS 4368:1967 | Alloy Steel billets, blooms and slabs for forging for general engineering purposes. |
| 98 | IS 4454 (Part 1) : 2001 | Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire. |
| 99 | IS 4454 (Part 2): 2001 | Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire. |
| 100 | IS 4824:2006 | Bead Wires for Tyres |
| 101 | IS 11169 (Part 1): 1984 | Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels |
| 102 | IS 11587:1986 | Structural Weather resistant steel. |
| 103 | IS 15103: 2002 | Fire resistant Steel- Specification |
| 104 | IS 15914:2011 | High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. |
| 105 | IS 15961:2012 | Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain) |
| 106 | IS 15962:2012 | Structural Steel for Building for Structures with improved seismic Resistance |
| 107 | IS 6527:1995 | Stainless Steel wire Rod |
| 108 | IS 6528:1995 | Stainless Steel Wires |
| 109 | IS 6603:2001 | Stainless Steel Bars and Flats |
| 110 | IS 5522:2014 | Stainless Steel sheets and strips for utensils- Specification |
| 111 | IS 6911:2017 | Stainless Steel Plate, Sheet and Strip- Specification |
| 112 | IS 15997:2012 | Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification |
| 113 | IS 1110 : 1990 | Ferrosilicon – Specification |
| 114 | IS 4409 : 1973 | Specification for Ferronickel |
| 115 | IS 1029 : 1970 | Specification for Hot rolled steel strip (bailing) |
| 116 | IS 2385 : 1977 | Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate |
| 117 | IS 3039 : 1988 | Specification for Structural steel for construction of hulls of ships |
| 118 | IS 9550 2001 | Bright steel bars – v Specification |
| 119 | IS 3748 : 1990 | Tool and die steels – Specification |
| 120 | IS 5517 : 1993 | Steel for hardening and tempering – Specification |
| 121 | IS 16732: 2019 | Galvanized Structural Steel – Specification |
| 122 | IS 7494 : 1981 | Specification for Steel for valves for internal combustion engines |
| 123 | IS 12146 : 1987 | Specification for Carbon manganese steel forgings for pressure vessels |
| 124 | IS 16585 : 2016 | Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state. |
| 125 | IS 2831 : 2012 | Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification |
| 126 | IS 1148: 2009 | Steel Rivet Bars (medium And High Tensile) – For Structural Purposes |
| 127 | IS 1673: 1984 | Specification for Mild Steel Wire, Cold Heading Quality |
| 128 | IS 1812: 1982 | Specification for Carbon Steel Wire for the Manufacture of Wood Screws |
| 129 | IS 2507: 1975 | Specification for Cold – rolled Steel Strips For Springs. |
| 130 | IS 2255: 1977 | Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process). |
| 131 | IS 3195: 1992 | Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification . |
| 132 | IS 3431: 1982 | Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension. |
| 133 | IS 3885-Part-1: 1992 | Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification. |
| 134 | IS 3885-Part- 2: 1992 | Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification. |
| 135 | IS 4223: 1975 | Specification for Steel Wire for Umbrella Ribs . |
| 136 | IS 4224: 1972 | Specification for Steel Wire for Staples, Pins And Clips. |
| 137 | IS 4397: 1999 | Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification. |
| 138 | IS 4398: 1994 | Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification |
| 139 | IS 6902: 1973 | Specification for Steel Wire for spokes. |
| 140 | IS 6967: 1973 | Specification for Steel For Electrically welded round Link Chains. |
| 141 | IS 7226: 1974 | Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes. |
| 142 | IS 7557: 1982 | Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets. |
| 143 | IS 8052: 2006 | Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification. |
| 144 | IS 8951: 2001 | Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification |
| 145 | IS 8952: 1995 | Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification |
| 146 | IS 9476: 1980 | Specification for Cold rolled steel strips for carbon steel razor blades. |
| 147 | IS 9962: 1981 | Specification for Steel Wire for Needles. |
| 148 | IS 17111: 2019 (ISO 683- 17: 2014) | Heat-Treated Steels Alloy and Free-Cutting Steels — Ball and Roller Bearing Steels. |
| 149 | IS 14331:1995 | Steels for High Temperature Bolting Applications – Specification |
| 150 | IS 12594: 1988 | Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement – Specification |
| 151 | IS 14650:1999 | Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification |
| 152 | IS 4882: 1979 | Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry |
| 153 | IS 2090:1983 | Specification for High Tensile Steel Bars used in Pre-stressed Concrete |
| 154 | IS 6529:1996 | Stainless Steel Blooms Billets And Slabs For Forging |
| 155 | IS 9294:1979 | Cold-Rolled Stainless Steel Strips for Razor Blades |
| 156 | IS 10631:1983 | Stainless Steel for welding electrode core wire |
| 157 | IS 10632 (Part 2):1983 | Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire. |
| 158 | IS 10632 (Part 3):1983 | Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates. |
| 159 | IS 11169 (Part 2): 1989 | Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steel |
| 160 | IS 5651:1987 | Steels for Pneumatic Tools |
| 161 | IS 9516:1980 | Heat Resisting Steels |
| 162 | IS 11952:1986 | Steels For Piston Pins (Gudgeon Pins) |
| 163 | IS 12045:1987 | Alloys Used in Electrical Resistance Metallic Heating Elements |
| 164 | IS 14652:1999 | 18 Percent Nickel Maraging Steel Bars and Rods |
| 165 | IS 1566:1982 | Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement |
| 166 | IS 1170: 1992 | Ferrochromium – Specification |
| 167 | IS 11946:1987 | Soft Magnetic Iron Strips |
| 168 | IS 11947:1987 | Soft Magnetic Iron Rods, Bars Flats and Sections |
| 169 | IS 963: 1958 | Chrome molybdenum steel bars and rods for aircraft purposes |
| 170 | IS 4454 (Part 4): 2001 | Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire |
| 171 | IS 1993 : 2018 | Cold-reduced Electrolytic Tin Plate |
| 172 | IS 12591:2018 | Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel |
| 173 | IS 412:1975 | Expanded Metal Steel Sheets For General Purposes |
| 174 | IS 2100: 1970 | Steel Billets,Bars And Sections For Boilers |
| 175 | IS 2589: 1975 | Hard Drawn Steel Wire For Upholstery Springs |
| 176 | IS 3298: 1981 | Mild Steel Rivet Bars For Ship Building |
| 177 | IS 4072: 1975 | Steel For Spring Washers |
| 178 | IS 8510 (Part II): 1977 | Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires |
| 179 | IS 8510 (PartIII): 1977 | Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires |
| 180 | IS 8563: 1977 | Half Round Mild Steel Wire For The Manufacture of Split Pins |
| 181 | IS 8564: 1977 | Steel Wire For Nipples For Spokes |
| 182 | IS 8565: 1977 | Heald Wire |
| 183 | IS 8566: 1977 | Steel Wire For Reeds |
| 184 | IS 8917: 1978 | Plates For Galvanizing Pots |
| 185 | IS 9442: 1980 | Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs |
| 186 | IS 9485: 1980 | Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling |
| 187 | IS 10794: 1984 | Mild steel wire for cotter pins |
| 188 | IS 12262:1988 | Trapezoidal Steel Wire For Springs Washers |
| 189 | IS 1470: 2013 | Silicomanganese – Specification |
| 190 | IS 15911:2010 | Structural Steel (Ordinary Quality) |
| 191 | IS 1171: 2011 | Ferromanganese – Specification |
| 192 | IS 4431: 1978 | Carbon And Carbon- Manganese Free- Cutting Steels |
| 193 | IS 4432: 1988 | Case Hardening Steels |
| 194 | IS 5518: 1996 | Steels For Die Blocks For Drop Forging |
| 195 | IS 8748: 1978 | Forged/Rolled CTC Segments |
| 196 | IS 12145: 1987 | Quenched And Tempered Alloy Steel Forgings For Pressure Vessels |
| 197 | IS 13387: 1992 | Tool Steel Forgings For Metal Forming |
| 198 | IS 14698:1999 | Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services |
| 199 | IS/ISO 11951 : 2016 | Cold – Reduced tinmill products – Blackplate |
| 200 | IS 3930: 1994 | Flame And Induction Hardening Steels |
| 201 | IS 5478: 1969 | Thermostat Metal Sheet and Strip |
| 202 | IS 13352: 1992 | Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs |
| 203 | IS 16644: 2018 | Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete |
| 204 | IS 17404 : 2020 | Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips |
| 205 | IS 18316: 2023 | Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/Fully Processed NonGrain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel |
| 206 | IS 18384: 2023 | Hot-Rolled Steel Strip, Sheet and Plates for Welded Steel Pipe for Pipeline Transportation Systems |
| 207 | IS 18385: 2023 | Hot- Dip galvanized/ galvannealed Steel Sheet and strips for Automotive Applications |
| 208 | IS 18513: 2023 | Hot-Dip Zinc – Aluminium – Magnesium Alloy Coated Steel Sheets, Plates and Strips |
| 209 | IS 1469: 1993 | Ferromolybdenum – Specification |
| 210 | IS 1466: 1985 | Specification for Ferro Vanadium |
| 211 | IS 8329 : 2000 | Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage |
| 212 | IS 9523:2000 | Ductile iron fittings for pressure pipes for water, gas and sewage |
| 213 | IS 1161:2014 | Steel tubes for structural purposes |
| 214 | IS 1239 (Part 1):2014 | Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes |
| 215 | IS 4270:2001 | Steel tubes used for water-wells (upto 200 mm dia) |
| 216 | IS 9139:1979 | Specification for Malleable iron shots and grits for use in foundries |
| Electrical Transformers | ||
| 217 | IS 1180 (Part 1) | Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed |
| Electrical Motors | ||
| 218 | IS 12615 | Energy Efficient Induction Motors-Three Phase Squirrel Cage |
| Capacitors | ||
| 219 | IS 2993 | A.C. motor capacitors |
| 220 | IS 13340 | Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V |
| 221 | IS 13585 Part 1 | Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation |
| Chemicals, Fertilizers, Polymers & Textiles | ||
| 222 | IS 252:2013 | Caustic Soda -Specification |
| 223 | IS 10116 : 2015 | Boric Acid – Specification |
| 224 | IS 15573 | Poly Aluminium Chloride |
| 225 | IS 5158: 1987 | Specification for Phthalic Anhydride, Technical |
| 226 | IS 8058:2018 | Pyridine |
| 227 | IS 16113:2013 | Gamma Picoline |
| 228 | IS 16112:2013 | Beta Picoline |
| 229 | IS 12084: 2018 | Morpholine |
| 230 | IS 297:2001 | Sodium Sulphide, Technical |
| 231 | IS 7129:1992 | Potassium Carbonate, Anhydrous |
| 232 | IS 170:2004 | Acetone |
| 233 | IS 4581:1978 | Phosphorous Trichloride, pure and Analytical Reagent |
| 234 | IS 11744:1986 | Phosphorous Pentachloride, Technical |
| 235 | IS 11657:1986 | Phosphorous Oxychloride, Technical |
| 236 | IS 2080:2021 | Stabilized Hydrogen Peroxide |
| 237 | IS 3205:1984 | Precipitated Barium Carbonate, Technical |
| 238 | IS 12928:1990 | Precipitated Barium for Ceramic and Glass Industry |
| 239 | IS 4505:2015 | Sodium Formaldehyde Sulphoxylate |
| 240 | IS 6100:1984 | Sodium Tripolyphosphate, Anhydrous, Technical |
| 241 | IS 14709:1999 | n- Butyl Acrylate |
| 242 | IS 336:1973 | Ether |
| 243 | IS 5295:1985 | Ethylene Glycol |
| 244 | IS 537:2011 | Toluene |
| 245 | IS 15030:2001 | Terephthalic Acid |
| 246 | IS 14707: 1999 | Methyl Acrylate |
| 247 | IS 14708:1999 | Ethyl Acrylate |
| 248 | IS 12345:1988 | Vinyl Acetate Monomer |
| 249 | IS 4105:2020 | Styrene (Vinyl Benzene) |
| 250 | IS 5149:2020 | Maleic Anhydride, Technical |
| 251 | IS 12540:1988 | Acrylonitrile |
| 252 | IS 17265:2019 | 100 Percent. Polyester Spun Grey and White Yarn (PSY) |
| 253 | IS 17261:2019 | Polyester Continuous Filament Fully Drawn Yarn (FDY) |
| 254 | IS 17264:2019 | Polyester Industrial Yarn (IDY) |
| 255 | IS 17262:2019 | Polyester Partially Oriented Yarn (POY) |
| 256 | IS 17263:2019 | Polyester Staple Fibres (PSF) |
| 257 | IS 7328:2020 | Polyethylene Material for moulding and extrusion |
| 258 | IS 11356:2020 | Styrene-Butadiene Rubber Latex |
| 259 | IS 16481:2016 | Synthetic Micro-Fibres for use in Cement Based Matrix |
| 260 | IS 12795:2020 | Linear Alkyl Benzene |
| 261 | IS 13601:1993 | Ethylene Vinyl Acetate (EVA) Copolymers |
| 262 | IS 7686:2020 | 3(N, N-DiEthyl) Aminophenol |
| 263 | IS 4566:2020 | Methylene Chloride (Dichloromethane) |
| 264 | IS 2012:2006 | Red Phosphorus |
| 265 | IS 17077 :2019/ISO 19062-1 : 2015 | Acrylonitrile Butadiene Styrene (ABS) |
| 266 | IS 869:2020 | Ethylene Dichloride |
| 267 | IS 17370:2020 | p-Xylene |
| 268 | IS 14434:1998 | Polycarbonate |
| 269 | IS 17397 (Part 1) : 2020/ISO 16365-1 : 2014 | Polyurethanes |
| 270 | IS 17442:2020 | Vinyl Chloride Monomer |
| 271 | IS 17450 : 2020 | 1,3 Phenylenediamine |
| 272 | IS 10931 : 1984 | Lauric Acid |
| 273 | IS 12029 : 1986 | Acid Oil |
| 274 | IS 12067: 1987 | Palm Fatty Acids |
| 275 | IS 12068 :1987 | Rice Bran Fatty Acids |
| 276 | IS 12069 : 1987 | Coconut Fatty Acids |
| 277 | IS 12124 : 1987 | Rubberseed Fatty Acids |
| 278 | IS 12361 :1988 | Hydrogenated Rice Bran Fatty Acids |
| Kitchen Appliances | ||
| 279 | IS 302 (Part 2/ Section 14) | Hand-held Blender |
| 280 | IS 4250 | Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer |
| Domestic Water Heaters for use with LPG | ||
| 281 | IS 15558 | Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas |
| Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls | ||
| 282 | IS 1391 (Part-1): 2017 | Room Air Conditioners- Specification Part 1 Unitary Air Conditioners |
| 283 | IS 1391 (Part-2): 2018 | Room Air Conditioners- Specification Part 2 Split Air Conditioners |
| 284 | IS 8148:2018 | Ducted and Package Air Conditioners |
| 285 | IS 11329:2018 | Finned type Heat Exchanger for Room Air Conditioner |
| 286 | IS 10617:2018 | Hermetic compressor |
| Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy | ||
| 287 | IS 1293 : 2005 | lugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes |
| 288 | IS 15884:2010 | Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2) |
| Domestic Gas Stoves for use with Liquefied Petroleum Gases | ||
| 289 | IS 4246: 2002 | Domestic Gas Stoves for use with Liquefied Petroleum Gases |
| Transparent Float Glass | ||
| 290 | IS 14900: 2018 | Transparent Float Glass |
| Domestic Pressure Cooker | ||
| 291 | IS 2347:2017 | Domestic Pressure Cooker |
| Cables | ||
| 292 | IS 1554(Part 1) : 1988 | Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 V |
| 293 | IS 1554(Part 2) : 1988 | Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 kV |
| 294 | IS 7098 (Part 1) : 1988 | Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V |
| 295 | IS 7098 (Part 2) : 2011 | Crosslinked polyethylene insulated Thermoplastics sheathed cables – Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV |
| 296 | IS 7098 (Part 3) : 1993 | Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kV |
| 297 | IS 14255 : 1995 | Aerial Bunched Cables – For Working Voltages Up to and Including 1100 Volts – Specification |
| 298 | IS 9968 (Part 2) : 2002 | Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kV |
| 299 | IS 8784 : 1987 | Specification for Thermocouple Compensating Cables |
| 300 | IS 9857 : 1990 | Welding Cables – Specification |
| 301 | IS 14494 : 2019 | Elastomer Insulated Flexible Cables for Use in Mines – Specification |
| 302 | IS 2593 : 1984 | Specification for Flexible Cables for Miner’s Cap-Lamps |
| 303 | IS 5950 : 1984 | Specification for Shot Firing Cables (for use other than in shafts) |
| 304 | IS 17048 : 2018 | Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V – Specification |
| Rubber Hose for Liquefied Petroleum Gas (LPG) | ||
| 305 | IS 9573(Part 1):2017 | Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial Application |
| 306 | IS 9573(Part 2):2017 | Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application. |
| Aluminium Foil | ||
| 307 | IS 15392 | Aluminium and Aluminium Alloy Bare Foil for Food Packaging |
| Non Electric Toys | ||
| 308 | IS 9873 (Part 1) : 2018 | Safety of Toys Part l Safety Aspects Related to Mechanical and Physical Properties. |
| IS 9873 (Part 2) : 2017 | Safety of Toys Part 2 Flammability. | |
| IS 9873 (Part 3) : 2017 | Safety Requirements for Toys Part 3 Migration of Certain Elements. | |
| IS 9873 (Part 4) : 2017 | Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use. | |
| IS 9873 (Part 7) : 2017 | Safety of Toys Part 7 Requirements and Test Methods for Finger Paints. | |
| IS 9873 (Part 9) : 2017 | Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children’s Products. | |
| Electric Toys | ||
| 309 | IS 15644: 2006 | Safety of Electric Toys. |
| Flat Transparent Sheet Glass | ||
| 310 | IS 2835 : 1987 | Flat Transparent Sheet Glass. |
| Safety Glass | ||
| 311 | IS 2553 (Part 1):2018 | Safety Glass -Specification Part 1 Architectural, Building and General uses. |
| 312 | IS 2553 (Part 2):2019 | Safety Glass -Specification Part 2 For Road Transport . |
| Woven Sacks | ||
| 313 | IS 14887:2014 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging of 50 kilogram Foodgrains |
| 314 | IS 16208:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 10 kilogram, 15 kilogram, 20 kilogram, 25 kilogram, and 30 kilogram Foodgrains |
| 315 | IS 14968:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 50 kilogram /25 kilogram Sugar |
| 316 | IS 14252:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for filling Sand |
| Butterfly Valves | ||
| 317 | IS 13095:1991 | Butterfly valves for general purpose |
| Reflectors for Bicycles | ||
| 318 | IS/ISO 6742-2:2015 | Retro-reflective Devices |
| Paper | ||
| 319 | IS 14490:2018 | Plain Copier Paper |
| Cattle Feeds | ||
| 320 | IS 2052 : 2009 | Compounded Feeds for Cattle |
| Automobile Wheel Rim Component | ||
| 321 | IS: 16192 (Part 1) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 1 |
| 322 | IS: 16192 (Part 2) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 2 |
| 323 | IS: 16192 (Part 3) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 3 |
| 324 | IS: 9436 | Performance Requirements and Methods of Tests for Wheels for Passenger Cars |
| 325 | IS: 9438 | Performance Requirements and Methods of Tests for Wheels or Rims for Trucks and Buses |
| Foot Wear | ||
| 326 | IS 5557: 2004 | Industrial and protective rubber knee and ankle boots |
| 327 | IS 5557 (Part 2): 2018 | All rubber gum boots and ankle boots |
| 328 | IS 5676: 1995 | Moulded solid rubber soles and heels |
| 329 | IS 6664: 1992 | Rubber microcellular sheets for soles and heels |
| 330 | IS 6719: 1972 | Solid PVC soles and heels |
| 331 | IS 6721: 1972 | PVC sandal |
| 332 | IS 10702: 1992 | Rubber Hawai Chappal |
| 333 | IS 12254: 1993 | Polyvinyl chloride(PVC) industrial boots |
| 334 | IS 13893: 1994 | Polyurethane sole, semirigid |
| 335 | IS 13995: 1995 | Unlined moulded rubber boots |
| 336 | IS 16645: 2018 | Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use |
| 337 | IS 16994: 2018 | Footwear for men and women for municipal scavenging work |
| 338 | IS 1989 (Part 1): 1986 | Leather safety boots and shoes for miners |
| 339 | IS 1989 (Part.2): 1986 | Leather safety boots and shoes for heavy metal industries |
| 340 | IS 3735: 1996 | Canvas Shoes Rubber Sole |
| 341 | IS 3736: 1995 | Canvas Boots Rubber Sole |
| 342 | IS 3976: 2018 | Safety Rubber Canvas Boots for Miners |
| 343 | IS 11226: 1993 | Leather safety footwear having direct moulded rubber sole |
| 344 | IS 14544: 1998 | Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole |
| 345 | IS 15844(Part-1): 2023 | Sports Footwear for General Purpose |
| 346 | IS 15844(Part-2): 2023 | Sports Footwear for Performance Sports Footwear |
| 347 | IS 15844(Part 3): 2024 | Sports Footwear for Professional Sports Footwear |
| 348 | IS 17012: 2018 | High ankle tactical boots with PU – Rubber sole |
| 349 | IS 17037: 2018 | Antiriot shoes |
| 350 | IS 17043 (Part-1): 2024 | Shoes for Services |
| 351 | IS 17043 (Part-2): 2024 | Shoes for General Purpose |
| 352 | IS 15298 (Part 2): 2016 | Personal protective equipment – Part 2 Safety Footwear |
| 353 | IS 15298 ( Part 3) : 2019 | Personal protective equipment – Part 3 Protective Footwear |
| 354 | IS 15298 (Part 4) : 2017 | Personal protective equipment – Part 4 Occupational Footwear |
| Press Tool-Punches | ||
| 355 | IS 4296 (Part 1):2016 | Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank |
| 356 | IS 4296 (Part 2):2016 | Tools for Pressing Part 2 Punches with Cylindrical Head and Straight or Reduced Shank |
| 357 | IS 4296 (Part 3):2016 | Tools for Pressing Part 3 Round Punches with 60 Degrees Conical Head and Reduced Shank |
| Helmet for riders of Two Wheeler Motor Vehicles | ||
| 358 | IS 4151: 2015 | Helmet for riders of Two Wheeler Motor Vehicles |
| Refrigerating Appliances | ||
| 359 | IS 17550 (Part 1): 2021 | Household Refrigerating Appliances- Characteristics and Test Methods part-1 General Requirements |
| 360 | IS 7872: 2018 | Freezers |
| Centrifugally cast (Spun) iron pipes | ||
| 361 | IS 1536: 2001 | Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage |
| 362 | IS 3989: 2009 | Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories |
| 363 | IS 15905: 2011 | Hubless centrifugally cast (Spun) iron pipes, fittings and accessories – Spigot series |
| Flux Cored (Tubular) Electrodes | ||
| 364 | IS 15769:2008 | Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel |
| Sewing Machine | ||
| 365 | IS 15449 : Part 1 : 2004 | Household Zig-Zag Sewing Machine Head |
| Water Treatment System | ||
| 366 | IS 16240 : 2023 | Reverse Osmosis Based Point of Use Water Treatment System for Drinking Purposes |
| Jute Bag | ||
| 367 | IS 1943:1995 | A- twill Jute Bag |
| 368 | IS 2566:1993 | B-twill Jute bags for packing foodgrains |
| 369 | IS 12650:2018 | Jute bags for packing 50 Kg foodgrains |
| 370 | IS 15138:2010 | Jute bags for packing 50 Kg sugar |
| 371 | IS 16186:2014 | Light weight jute sacking bags for packing 50 Kg foodgrains |
| 372 | IS 16372:2015 | Jute bags for packing up to 30 Kg foodgrains |
| Viscose Staple Fibres | ||
| 373 | IS 17266:2019 | Viscose Staple Fibres |
| Geo Textiles | ||
| 374 | IS 15351 : 2015 | Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining |
| 375 | IS 15909 : 2020 | Poly Vinyl Chloride (PVC) Geomembranes |
| 376 | IS 16653 : 2017 | Needle punched non-woven geobags |
| 377 | IS 16654: 2017 | Polypropylene Multifilament woven geobags |
| 378 | IS 14715 (Part 1): 2016 | Jute Geotextiles |
| 379 | IS 14715 (Part 2): 2016 | Jute Geotextiles |
| 380 | IS 15869 : 2020 | Open Weave Coir Bhoovastra |
| 381 | IS 16391 : 2015 | Geotextiles used in sub-grade separation in pavement structures |
| 382 | IS 16393 : 2015 | Geotextiles used in Subsurface Drainage Application |
| 383 | IS 16362 : 2020 | Geotextiles used in Sub-grade Stabilisation in pavement structures |
| 384 | IS 16352 : 2020 | High Density Polyethylene (HDPE) Geomembranes for lining |
| 385 | IS 16090:2013 | Geotextiles used as protection (or cushioning) materials |
| 386 | IS 16392:2015 | Geotextiles for permanent erosion control in hard armor systems |
| 387 | IS 17371:2020 | Geogrids for flexible pavements |
| 388 | IS 17372:2020 | Polymeric strip or geostrip used as soil reinforcement in retaining structures |
| 389 | IS 17373:2020 | Geogrids used in reinforced soil retaining structures |
| 390 | IS 17374:2020 | Reinforced HDPE membrane for effluents and chemical resistance lining |
| 391 | IS 17483 (Part 1): 2020 | Geocells |
| 392 | IS 17483 (Part 2): 2020 | Geocells |
| 393 | IS 17880 :2022 | Geosynthetics — Synthetic Polymer RopeGabions for Coastal and Waterways Protection — Specification |
| Protective Textiles | ||
| 394 | IS 15741 : 2007 | Curtains and Drapes |
| 395 | IS 16890 : 2018 | Protective clothing for firefighters |
| 396 | IS 16874 : 2018 | Protective gloves for firefighters |
| 397 | IS 15748 : 2022 | Protective clothing for industrial workers exposed to heat |
| 398 | IS 15742 : 2007 | Clothing made of limited flame spread materials and material assemblies affording protection against heat and flame |
| 399 | IS 15809 : 2017 | High visibility Warning Clothes |
| 400 | IS 16655 : 2017 | Protective Clothing for use in welding and allied processes |
| 401 | IS 16725 : 2018 | Tactical 3 point sling |
| 402 | IS 16726 : 2018 | Pouch for ammunition and grenades made of disruptive pattern nylon-66 |
| 403 | IS 17051 : 2018 | Bullet resistant jackets |
| 404 | IS 17286 : 2019 | Water-proof multipurpose rain poncho |
| Upholstered Composites used for Non-Domestic Furniture | ||
| 405 | IS 15768 : 2008 | Upholstered composites used for non-domestic furniture |
| Flame- Producing Lighters | ||
| 406 | IS/ISO 9994:2018 | Lighters- Safety Specifications |
| 407 | IS/ISO 22702:2018 | Utility Lighters – Safety Specifications |
| Potable Water Bottles | ||
| 408 | IS 17803: 2022 | Potable Water Bottles (Copper, Stainless Steel, Aluminum) |
| Welding Rods and Electrodes | ||
| 409 | IS 814 : 2004 | Covered electrodes for manual metal arc welding of carbon and carbon manganese steel |
| 410 | IS 6419 : 1996 | Welding rode and bare electrodes for gas shielded arc welding of structural steel |
| Smart Meters | ||
| 411 | IS 16444 Part 1 | A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2 |
| 412 | IS 16444 Part 2 | A.C. Static Transformer Operated Watt Hour and Var-Hour Smart Meters, Class 0.2S, 0.5S and 1.0S |
| Insulated Flask, Bottles and Containers for Domestic Use | ||
| 413 | IS 17790 : 2022 | Insulated Flask for Domestic Use |
| 414 | IS 17526 : 2021 | Domestic Stainless steel vacuum flask/bottle |
| 415 | IS 17569: 2021 | Insulated Container for Food Storage |
| 416 | IS 3513 (Part 1) : 1989 | Resin treated compressed wood laminates |
| 417 | IS 3513 (Part 2) : 1989 | Resin treated compressed wood laminates (compregs) – For chemical purposes |
| 418 | IS 3513 (Part 3) : 1989 | Resin treated compressed wood laminates (compregs) – For general purposes |
| Bolts, Nuts and Fasteners | ||
| 419 | IS 1363 (Part 1) :2019 | Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64) |
| 420 | IS 1363 (Part 2) :2018 | Hexagon Head Screw (Size ranges from M 5 to 64) |
| 421 | IS 1363 (Part 3) :2018 | Hexagon Head Bolts, Screws and Nuts of product Grade C – Hexagon Nuts (Size Range M5 to M64) |
| 422 | IS 1364 (Part 1) :2018 | Hexagon Head Bolts, Screws and Nuts of product Grades A and B – Hexagon Head Bolts (Size Range M 1.6 To M 64) |
| 423 | IS 1364 (Part 2) :2018 | Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Hexagon Head Screws (Size Range M 1.6 to M 64) |
| 424 | IS 4621:1975 | Indicating Bolts for use in public baths and lavatories |
| 425 | IS 5187: 1972 | Flush Bolts |
| 426 | IS 10238:2001 | Fasteners – Threaded Steel Fastener – Step Bolts for Steel Structures |
| 427 | IS 12427 : 2001 | Fasteners – Threaded Steel Fasteners – Hexagon Head Transmission Tower Bolts |
| 428 | IS 3757 : 1985 | High Strength Structural Bolts |
| 429 | IS 204 (Part 2): 1992 | Tower Bolts- Non-ferrous metal |
| 430 | IS 204 (Part 1): 1991 | Tower Bolts- Ferrous metals |
| 431 | IS 15834 : 2022 | Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks |
| 432 | IS 2681 : 1993 | Non-ferrous metal sliding door bolts (aldrops) for use with padlocks |
| 433 | IS 281 : 2009 | Mild steel sliding door bolts for use with padlocks |
| 434 | IS 7534: 1985 | Sliding locking bolts for use with padlocks |
| 435 | IS 1284 : 1975 | Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes |
| 436 | IS 15833 : 2009 | Stainless steel Tower Bolts |
| 437 | IS 6623 : 2004 | High Strength Structural Nuts |
| 438 | IS 14756 : 2022 | Stainless Steel Cookware |
| 439 | IS 1660:2009 | Wrought Aluminium Utensils |
| 440 | IS 13983:1994 | Stainless Steel Sinks for Domestic Purposes |
| 441 | IS 9396 (Part 1) : 1987 | Round Open Top Sanitary Cans for Foods and Drinks – Tinplate |
| 442 | IS 14407:1996 | Aluminium cans for beverages |
| Domestic Gas Stoves for use with PNG | ||
| 443 | IS 17153:2019 | Domestic Gas Stoves for use with Piped Natural Gas (PNG) |
| Fire Extinguishers | ||
| 444 | IS 15683 : 2018 | Portable Fire Extinguishers |
| 445 | IS 16018:2012 | Wheeled Fire Extinguishers |
| Electric Ceiling Type Fans | ||
| 446 | IS 374:2019 | Electric Ceiling Type Fans |
| Wood Based Boards | ||
| 447 | IS 1659:2004 | Block Boards |
| 448 | IS 12823:2015 | Prelaminated particle boards from wood and other Lignocellulosic material |
| 449 | IS 3087:2005 | Particle boards of wood and other lignocellulosic materials (medium density) for general purpose |
| 450 | IS 12406:2021 | Medium density fibre boards for general purpose |
| 451 | IS 3097:2006 | Veneered particle boards |
| Cast Iron Products | ||
| 452 | IS 1726:1991 | Cast iron man hole covers and frames |
| 453 | IS 1729:2002 | Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipelines socket and spigot series |
| 454 | IS 1879:2010 | Malleable cast iron pipe fittings |
| 455 | IS 13349:1992 | Cast iron single faced thimble mounted sluice gates |
| 456 | IS 210:2009 | Grey iron castings |
| 457 | IS 1537:1976 | Vertically cast – iron pressure pipes for water, gas and sewage |
| Solar DC Cable and Fire Survival Cable | ||
| 458 | IS 17293:2020 | Electric Cable for Photovoltic Systems for rated voltage 1500V DC |
| 459 | IS 17505(Part 1): 2021 | Thermosetting Insulated, Fire Survival Cables for working voltage upto and including 1100V AC and 1500V DC |
| Metals and Alloys | ||
| 460 | IS 617:1994 | Cast aluminium and its alloys – Ingots and castings for general engineering purposes |
| 461 | IS 11890 : 1987 | High purity primary aluminum ingot for remelting for special applications |
| 462 | IS 6754:1972 | Aluminum alloy ingots for remelting for general engineering purpose |
| 463 | IS 2590 : 1987 | Primary aluminium ingots for remelting for general engineering purpose |
| 464 | IS 4026 : 2023 | Aluminum ingots billets and wire bars (EC GRADE) |
| 465 | IS 191:2007 | Copper |
| 466 | IS 7506:1987 | Nickel Powder |
| Plywood and Wooden flush door shutters | ||
| 467 | IS 303 : 1989 | Plywood for general purposes |
| 468 | IS 2202 (Part 1) : 1999 | Wooden flush door shutters (solid core type) – Plywood face panels |
| 469 | IS 710 : 2010 | Marine plywood |
| 470 | IS 5509 : 2021 | Fire retardant plywood |
| 471 | IS 1328 : 1996 | Veneered decorative plywood |
| 472 | IS 2191 (Part 2): 2022 | Wooden flush door shutters (cellular and hollow core type) – Particle board and hardboard face panels |
| 473 | IS 2191 (Part 1): 2022 | Wooden flush door shutters (cellular and hollow core type) – Plywood face panels |
| 474 | IS 2202 (Part 2): 2022 | Wooden Flush Door Shutters (Solid core type) – Particle board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels |
| 475 | IS 4990 : 2011 | Plywood for concrete shuttering works – Specification |
| 476 | IS 10701 : 2012 | Structural plywood – Specification |
| Flux Cored Solder Wire | ||
| 477 | IS 1921: 2005 | Flux Cored Solder Wire |
| Miscellaneous Steel Products | ||
| 478 | IS 15155 : 2020 | Bar or wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating Including Specials |
| 479 | IS 16651 : 2017 | High Strength deformed stainless steel bars and wires for concrete reinforcement |
| 480 | IS 6392 : 2020 | Steel Pipe Flanges |
| 481 | IS 6913 : 1973 | Stainless steel tubes for the food and beverage industry |
| Aluminium and Aluminium Alloy Products | ||
| 482 | IS 7092 (Part 1):1992 | Aluminium alloy tubes for irrigation purposes -welded tubes |
| 483 | IS 7092 (Part 2):1987 | Aluminium alloy tube for irrigation purposes – extruded tube |
| 484 | IS 5484:1997 | EC Grade Aluminium Rod produced by Continuous Casting and Rolling |
| 485 | IS 733:1983 | Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) |
| 486 | IS 734:1975 | Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes |
| 487 | IS 736:1986 | Wrought aluminium and aluminium alloy plate for general engineering purposes |
| 488 | IS 737:2008 | Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes |
| 489 | IS 739:1992 | Wrought aluminium and aluminium alloy wire for general engineering purposes |
| 490 | IS 740:1977 | Wrought aluminium and aluminium alloy rivet stock for general engineering purposes |
| 491 | IS 5082:1998 | Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications |
| 492 | IS 16011:2012 | Aluminium and aluminium alloy foil for pharmaceutical packaging |
| 493 | IS 17682:2021 | Aluminium composite panel |
| 494 | IS 1285:2002 | Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes |
| 495 | IS 2067:1975 | Wrought Aluminium Wire for Electrical Purposes |
| 496 | IS 21:1992 | Wrought aluminium and aluminium alloys for manufacture of utensils |
| 497 | IS 1254:2007 | Corrugated Aluminium Sheet |
| 498 | IS 7902:2001 | Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications |
| Precision Roller and Bush Chains, attachments and associated chain sprockets | ||
| 499 | IS 2403 :2014 / ISO 606 : 2004 | Short – Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets |
| Self- Contained Drinking Water Coolers | ||
| 500 | IS 1475 (Part 1) : 2001 | Self- Contained Drinking Water Coolers – Energy Consumption and Performance |
| Medical Textiles | ||
| 501 | IS 5405 : 2019 | Sanitary napkins |
| 502 | IS 17509 : 2021 | Disposable baby diaper |
| 503 | IS 17514 : 2021 | Reusable Sanitary pad/ Sanitary Napkin/ Period Panties |
| 504 | IS 17349 : 2020 | Shoe covers |
| 505 | IS 17354 : 2020 | Dental Bib or Napkins |
| 506 | IS 17630 : 2021 | Bed sheet and Pillow Cover |
| Agro Textiles | ||
| 507 | IS 16718 : 2021 | Polypropylene Spun Bonded Non—Woven Crop Cover and Fruit Skirting Bags for Agriculture and Horticulture Applications |
| 508 | IS 16513 : 2016 | Insect nets for Agriculture and Horticulture purpose |
| 509 | IS 16202 : 2014 | Woven Ground covers for Horticulture Application |
| 510 | IS 17070 : 2019 | Jute Agro textiles for Growth of Plants and Suppression of Weeds |
| 511 | IS 15907 : 2010 | High Density Polyethylene (HDPE) woven beds for vermiculture |
| 512 | IS 16089 : 2013 | Sapling bags for growth of seedling /sapling |
| 513 | IS 16190 : 2014 | High Density Polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose |
| 514 | IS 16390 : 2015 | Nylon Knitted seamless gloves for tobacco harvesters |
| 515 | IS 16627 : 2017 | High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system |
| 516 | IS 17355 : 2020 | Propylene Spun bonded non—woven mulch mat for agriculture and horticulture applications |
| 517 | IS 17356 : 2020 | Windshield nets for agriculture and horticulture purpose |
| 518 | IS 17357 : 2020 | Harvest nets for agriculture and horticulture purposes |
| 519 | IS 17358 (Part 1) : 2020 | Fencing nets for agriculture and horticulture purposes – made from extruded polymer mesh |
| 520 | IS 17358 (Part 2) : 2020 | Fencing nets for agriculture and horticulture purposes -made from mono filament yarns and combination of tape and mono filament yarns |
| 521 | IS 17513 : 2020 | Plant Support Nets for Agriculture and Horticulture Purposes |
| 522 | IS 17728 : 2021 | High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System |
| 523 | IS 17729 : 2021 | Flexible Water Storage Tank for Agriculture and Horticulture Purposes |
| 524 | IS 17730 (Part 1) : 2021 | Hail Protection Nets for Agriculture and Horticulture Purposes- Warp Knitted Hail Protection Nets |
| 525 | IS 17730 (Part 2) : 2021 | Hail Protection Nets for Agriculture and Horticulture Purposes – Woven Hail Protection Nets |
| 526 | IS 17731 : 2021 | Laminated Woven Orchard Protection Covers |
| Copper Products | ||
| 527 | IS 12444:2020 | Copper Wire Rods for Electrical Applications |
| 528 | IS 613:2000 | Copper Rods and Bars for Electrical Purposes |
| 529 | IS 1897:2008 | Copper strip for electrical purposes |
| 530 | IS 4171:1983 | Copper rods and bars for general engineering purposes |
| 531 | IS 1545: 1994 | Solid drawn copper and copper alloy tubes for condensers and heat exchangers |
| 532 | IS 2501: 1995 | Solid drawn copper tubes for general engineering purposes |
| 533 | IS 14810: 2000 | Copper Tubes for plumbing- Specification/p> |
| 534 | IS 10773:1995 | Wrought Copper Tubes for Refrigeration and Air- Conditioning Purpose |
| 535 | IS 4412:1981 | Copper wires for general engineering purposes |
| Drums and Tins | ||
| 536 | IS 13997:2014 | Drums, Large Open Top |
| 537 | IS 1783 (Part 1) :2014 | Drums Large, Fixed Ends – Grade A |
| 538 | IS 1783 (Part 2) :2014 | Drums, Large, Fixed Ends – Grade |
| 539 | IS 2552:1989 | Steel Drums (Galvanized and Ungalvanized) |
| 540 | IS 3575:1993 | Bitumen Drums |
| 541 | IS 916:2000 | Square Tins for Solid Products |
| 542 | IS 10325:2000 | Square Tins – 15 Kilograms or litre for Ghee, Vanaspati, Edible Oils and Bakery |
| Door Fittings | ||
| 543 | IS 6343:1982 | Door closers (pneumatically regulated) for light doors weighing up to 40 kg |
| 544 | IS 14912:2001 | Door closers, concealed type (hydraulically regulated) |
| 545 | IS 3564:1995 | Hydraulically Regulated Door Closers |
| 546 | IS 6315:1992 | Floor springs (hydraulically regulated) for heavy doors |
| 547 | IS 1019:1974 | Rim Latches |
| 548 | IS 208:2020 | Door Handles |
| 549 | IS 4992:1975 | Door handles for mortice lock (vertical type) |
| Bottled Water Dispenser | ||
| 550 | IS 17681:2022 | Bottled water dispensers |
| Helmet for Police Force, Civil Defence and Personal Protection | ||
| 551 | IS 2745:1983 | Non-metal helmet for firemen and civil defence personnel |
| 552 | IS 2925:1984 | Industrial safety helmets |
| 553 | IS 9562:1980 | Non- metal helmet for Police Force |
| Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh | ||
| 554 | IS 2266 : 2019 | Steel Wire Ropes for General Engineering Purposes |
| 555 | IS 2365 : 2018 | Steel Wire Suspension Ropes for Lifts, Elevators and Hoists |
| 556 | IS 1855:2022 | Stranded steel wire ropes for winding and man –riding haulages in mines |
| 557 | IS 1856:2005 | Steel Wire Rope forhaulage |
| 558 | IS 2141:20005 | Hot Dip Galvanized Stay Strand |
| 559 | IS 4521:2001 | Wire Ropes Used in Oil Wells and Oil Well Drilling |
| 560 | IS 6590:1972 | Braided Nylon Ropes for Mountaineering Purposes |
| 561 | IS 278:2009 | Galvanized Steel Barbed Wire for Fencing |
| 562 | IS 16014:2018 | Mechanically Woven, Double- Twisted, Hexagonal Wire Mesh Gabions, Revet Mattresses and Rock Fall Netting and Other Rock Fall Netting and Other Products for Civil Engineering Purposes (Galvanized Steel Wire or Galvanized Steel Wire with polymer coating) |
| Material Measure of length | ||
| 563 | IS 1269(Part 1) : 1997 | Legal Metrology – Material Measure of length – Woven metallic and glass fibre tape measures |
| 564 | IS 1269(Part 2) : 1997 | Legal Metrology – Material Measure of length – Steel tape measures |
| Polyethylene Woven Sacks | ||
| 565 | IS 9755 : 2021 | Textiles—High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging Fertilizers |
| 566 | IS 11652 : 2017 | Textiles — High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement |
| 567 | IS 16709 : 2017 | Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement |
| 568 | IS 16703 : 2017 | Textiles — High Density Polyethylene (HDPE) Polypropylene (PP) Woven Sacks for Packaging of 25 kg Polymer Materials |
| 569 | IS 17399 : 2020 | Textiles — Polypropylene (PP)/ High Density Polyethylene (HDPE) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution |
| Safes, Safe Deposit Locker Cabinets and key locks | ||
| 570 | IS 550 (Part 1) : 2014 | Safes |
| 571 | IS 5244 : 2020 | Safe deposit locker cabinets |
| 572 | IS 17566 : 2021 | Key locks for security equipment |
| 573 | IS 12817:2020 | Stainless steel butt hinges |
| Hinges | ||
| 574 | IS 1341:2018 | Steel Butt Hinges |
| 575 | IS 205:1992 | Non-ferrous metal butt hinges |
| 576 | IS 206:2010 | Tee and strap hinges |
| 577 | IS 362:1991 | Parliament hinges |
| 578 | IS 3818:1992 | Continuous (Piano) hinges |
| 579 | IS 3843:1995 | Steel back flap hinges |
| 580 | IS 453:1993 | Double-acting spring hinges |
| 581 | IS 18297:2023 | Cabinet hinges |
| Cycle and Rickshaw Tyres and Tubes | ||
| 582 | IS 2414:2005 | Cycle and Rickshaw Pneumatic Tyres |
| 583 | IS 2415 :2015 | Cycle – Rubber Tubes (Moulded or Jointed) |
| Rubber Gaskets for Pressure Cookers | ||
| 584 | IS 7466 :1994 | Rubber Gaskets for Pressure Cookers |
| Laboratory Glassware | ||
| 585 | IS 878 :2008 | Laboratory glassware – Graduated measuring cylinders |
| 586 | IS 915:2012 | Laboratory glassware – One – Mark volumetric flasks |
| 587 | IS 1381 (Part 1):2003 | Laboratory glassware – Narrow-necked boiling flasks |
| 588 | IS 1117:2018 | Laboratory glassware – Single volume pipettes |
| 589 | IS 2619:2018 | Glass beakers |
| Electrical Accessories | ||
| 590 | IS 14772: 2020 | Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations |
| 591 | IS 14927 (Part 2): 2001 | Cable Trunking and Ducting Systems for Electrical Installations – Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling |
| 592 | IS 1258: 2005 | Bayonet Lamp Holders |
| 593 | IS 15787: 2008 | Switch-socket-outlets (non-interlock type) |
| 594 | IS 13774:2021 | Live Working Gloves of Insulating Material |
| 595 | IS 15652:2006 | Insulating Mats for Electrical Purposes |
| 596 | IS 7809 (Part3/ Sec1): 1986 | Specification for Pressure sensitive adhesive insulating tapes for electrical purposes- Part 3 requirements or individual materials – Sec 1 plasticized polyvinylchloride tapes with non- Thermosetting adhesive |
| 597 | IS 16012: 2012 | Poly- Laminated aluminium cable wrap |
| Poly Vinyl Chloride (PVC) Homopolymers | ||
| 598 | IS 17658:2021 | Poly Vinyl Chloride (PVC) Homopolymers |
| Polypropylene (PP) Materials for Moulding and Extrusion | ||
| 599 | IS 10951: 2020 | Polypropylene (PP) Materials for Moulding and Extrusion |
| Diesel Engines – NOx Reduction Agent AUS 32 | ||
| 600 | IS 17042 (Part-1): 2018 | Diesel Engines – NOx Reduction Agent AUS 32 |
| Air Cooler and Air Filters | ||
| 601 | IS 3315:2019 | Evaporative Air Coolers (Desert Coolers) |
| 602 | IS 17570 (Part 1): 2021 ISO 16890-2: 2016 | Air Filters for general ventilation – Technical specifications requirements and classification system based upon particulate matter efficiency (ePM) |
| Electrical Appliances | ||
| 603 | IS 302 (Part 2/Sec 9): 2009 | Safety of household and similar electrical appliances – particular requirements – toasters, grills, roasters and similar appliances |
| 604 | IS 302 (Part 2/Sec 31): 2009 | Safety of household and similar electrical appliances – particular requirements – range hoods |
| 605 | IS 302 (Part 2/Sec 23): 2009 | Safety of household and similar electrical appliances – particular requirements – appliances for skin or hair care |
| 606 | IS 302 (Part 2/ Sec 80): 2017 | Household and similar electrical appliances – Safety – particular requirements for fans |
| 607 | IS 302 (Part 2/Sec 75): 2018 | Safety of Household and Similar Electrical Appliances – Particular Requirements – Commercial Dispensing Appliances and Vending Machines |
| 608 | IS 302 (Part 2/Sec 7): 2010 | Safety of household and similar electrical appliances – particular requirements – domestic electric clothes washing machines |
| Asbestos or Fibre Cement based Products | ||
| 609 | IS 459:1992 | Corrugated and Semi – Corrugated Asbestos Cement Sheets |
| 610 | IS 1592:2003 | Asbestos Cement Pressure Pipes and Joints |
| 611 | IS 2096:1992 | Asbestos Cement Flat Sheets |
| 612 | IS 2098:1997 | Asbestos Cement Building Boards |
| 613 | IS 6908:1991 | Asbestos – Cement Pipes and Fittings for Sewerage and Drainage |
| 614 | IS 13000:1990 | Silica-Asbestos-Cement Flat Sheets |
| 615 | IS 8870:1978 | Asbestos Cement Cable Conduits and Troughs |
| 616 | IS 9627:1980 | Asbestos Cement Pressure Pipes (Light Duty) |
| 617 | IS 13008:1990 | Shallow Corrugated Asbestos Cement Sheets |
| 618 | IS 14862:2000 | Fibre Cement Flat Sheets |
| 619 | IS 14871:2000 | Fibre Reinforced Cement Products – Long Corrugated or Asymmetrical Section Sheets and Fittings for Roofing and Cladding |
| Water meters and accessories | ||
| 620 | IS 2373:1981 | Water meters (bulk type) |
| 621 | IS 779: 1994 | Water meters (domestic type) |
| 622 | IS 2692: 1989 | Ferrules for water services |
| Gypsum based Building Materials | ||
| 623 | IS 2095 (Part 1):2011 | Gypsum plaster boards – Specification: Part 1 plain gypsum plaster boards |
| 624 | IS 17400:2021 | Glass Fibre Reinforced Gypsum Panels |
| 625 | IS 2095 (Part 2): 2022 | Gypsum Plaster Boards – Coated/ Laminated Gypsum Plaster Boards |
| 626 | IS 2095 (Part 3):2022 | Gypsum Plaster Boards – Reinforced Gypsum Plaster Boards and Ceiling Tiles |
| Electrical Appliances for domestic water heating | ||
| 627 | IS 302 (Part 2/Sec 21): 2018 | Appliances for stationary storage type electric water heaters |
| 628 | IS 302 (Part 2/Sec 35): 2017 | Appliances for electric instantaneous water heaters |
| 629 | IS 368: 2014 | Electric Immersion Water Heaters |
| 630 | IS 2082: 2018 | Stationary storage type electric water heaters |
| 631 | IS 17150: 2019 | Mini domestic water heater for use with piped natural gas (PNG)s |
| V-Belt | ||
| 632 | IS 2494 (Part 1): 1994 | V-Belts – Endless V-Belts for Industrial Purposes – General Purpose |
| 633 | IS 2494 (Part 2): 1993 | V-Belts – Endless V-Belts for Industrial Purposes – fire resistant and antistatic V-Belts |
| 634 | IS 14261: 1995 | Transmission Devices – V – Belts endless narrow V-Belts for industrial use |
| Telescopic Ball Bearing Drawer Slide | ||
| 635 | IS 17954:2023 | Telescopic Ball Bearing Drawer Slide |
| Cross Recessed Screws | ||
| 636 | IS 18471 (Part 1) : 2023/ ISO 15481:1999 | Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Part 1 Pan Head |
| 637 | IS 18471 (Part 2) :2023/ ISO 15482:1999 | Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk Head |
| 638 | IS 18471 (Part 3) :2023/ ISO 15483:1999 | Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Part 3 Raised Countersunk Head |
| 639 | IS 18476 : 2023/ ISO 15480:2019 | Fasteners – Hexagon Washer Head Drilling Screws with Tapping Screw Thread |
| 640 | IS 18480 (Part 1) :2023/ ISO 7049 : 2011 | Cross Recessed Tapping Screws: Part 1 Pan Head |
| 641 | IS 18480 (Part 2) :2023/ ISO 7050 : 2011 | Cross Recessed Tapping Screws Part 2 Countersunk Flat Head |
| 642 | IS 18480 (Part 3) :2023/ ISO 7051 : 2011 | Cross Recessed Tapping Screw Part 3 Raised Countersunk Oval Head |
| 643 | IS 7483 : 2018/ ISO 7045 : 2011 | Pan Head Screws With Type H or Type Z Cross Recess – Product Grade A |
| 644 | IS 7485 (Part 1) : 2018/ ISO 7046 -1 : 2011 | Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess – Product Grade A Part 1 Steel Screws of Property Class 4.8 |
| 645 | 7485 (Part 2) : 2018/ISO 7046-2 : 2011 | Countersunk flat head screws (common head style) with type H or Type Z Cross Recess – Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non – Ferrous Metal Screws |
| 646 | IS 7486 : 2018/ ISO 7047 : 2011 | Raised countersunk head screws (Common Head Style) with type H or type Z cross recess – Product grade A |
| 647 | IS 18507 : 2024 | Drywall Screws – Specification |
| 648 | IS 18508 : 2024 | Chipboard Screws – Specification |
| 649 | IS 18509 : 2023 | Cross-recessed Countersunk Head Wood Screws – Specification |
| Safety of Household, Commercial and Similar Electrical Appliances | ||
| 650 | IS 302 (Part 1) : 2024 IEC 60335-1:2020 | All Electrical Appliances |
| Vacuum Cleaners and Water Suction Cleaning Appliances | ||
| Spin Extractors | ||
| Cooking Ranges, Hobs, Ovens and Similar Appliances | ||
| Electrical Shavers Hair, Clippers and Similar Appliances | ||
| Tumbler Dryers | ||
| Warming Plates and Similar Appliances | ||
| Frying Pans, Deep Fat Fryers and similar appliances | ||
| Appliances for Heating Liquids | ||
| Massage Appliances | ||
| Electric Forced Convection Ovens, Steam Cookers and Steam -Convection Ovens | ||
| Electric Heating Tools | ||
| Electric Steam Cookers | ||
| Insect Killers | ||
| Electric Call Bells and Buzzers for Indoor Use | ||
| Electric Water Boilers | ||
| Electric Coffee Makers | ||
| Electric Bean Slicers | ||
| Electric Berryjuice Extractors | ||
| Electric Can Openers | ||
| Electric Centrifugal Juicers | ||
| Electric Churn | ||
| Electric Citrusfruit Squeezers | ||
| Electric Coffee Mills not exceeding 500g hopper capacity | ||
| Electric Cream Whippers | ||
| Electric Egg Beaters | ||
| Electric Food Processors | ||
| Electric Grain Grinders not exceeding 3l hopper capacity | ||
| Electric Graters | ||
| Electric IceCream Machines, including those for use in refrigerators and freezers | ||
| Electric Knife Sharpeners | ||
| Electric Knives | ||
| Electric Noodle Makers | ||
| Electric Potato Peelers | ||
| Electric Shredders | ||
| Electric Sieving Machines | ||
| Slicing Machines | ||
| Electric Hot Plates | ||
| Single Walled Baking Ovens | ||
| Low Speed Food Grinding Machines | ||
| Dishwashers | ||
| Floor Treatment Machines and Wet Scrubbing Machines | ||
| Food Waste Disposers | ||
| Blankets, Pads, Clothing and Similar Flexible Heating Appliances | ||
| Appliances for Skin Exposure to Optical Radiation | ||
| Commercial Electric Cooking Ranges, Ovens, Hobs and Hob Elements | ||
| Commercial Electric Doughnut Fryers and Deep Fat Fryers | ||
| Commercial Electric Griddles and Griddle Grills | ||
| Commercial Electric Multi – purpose Cooking Pans | ||
| Commercial Electric Forced Convection Ovens, Steam Cookers and Steam – Convection Ovens | ||
| Clothes Dryers and Towel Rails | ||
| Commercial Electric Boiling Pans | ||
| Commercial Electric Grillers and Toasters | ||
| Commercial Electric Appliances for keeping Food and Crockery Warm | ||
| Commercial Electric BainsMarie | ||
| Oral Hygiene Appliances | ||
| Sauna Heating Appliances and Infrared Cabins | ||
| Surface-Cleaning Appliances for Household use Employing Liquids or Steam | ||
| Electrical Appliances for use with Aquariums and Garden Ponds | ||
| Commercial Electric Dishwashing Machines | ||
| Whirlpool Baths and Whirlpool Spas | ||
| Thermal Storage Room Heaters | ||
| Commercial Electric Rinsing Sinks | ||
| Commercial Electric Kitchen Machines | ||
| Air-Cleaning Appliances | ||
| Water-Bed Heaters | ||
| Fixed Immersion Heaters | ||
| Outdoor Barbecues | ||
| Foot Warmers and Heating Mats | ||
| Amusement Machines and Personal Service Machines | ||
| Toilet Appliances | ||
| Fabric Steamers | ||
| Drives for Vertically Moving Garage Doors for Residential Use | ||
| Humidifiers | ||
| Commercial Electric Hoods | ||
| Vaporizers | ||
| Gas, Oil and Solid-Fuel Burning Appliances Having Electrical Connections | ||
| Electrolysers | ||
| Beauty Care Appliances Incorporating Lasers and Intense Light Sources | ||
| Personal-eTransporters | ||
| Skin Beauty Care Appliances | ||
| Furniture with Electrically Motorized Parts | ||
| Commercial Vacuum Packaging Appliances | ||
| Hand held electric Engraving Tools | ||
| DC supplied/ battery-operated vacuum cleaners | ||
| DC supplied/ battery-operated shavers, trimmers, clippers and similar appliances | ||
| DC supplied/ battery-operated Massage appliances | ||
| DC supplied/ battery-operated blenders, juicers | ||
| DC supplied/ battery-operated toothbrush and other oral hygiene appliances | ||
| DC supplied/ battery-operated foot warmer and heating mats | ||
| DC supplied/ battery-operated air purifier | ||
| Hand Tools | ||
| 651 | IS 4123:1982 | Chain Pipe Wrenches |
| 652 | IS 4508:1992 | Open Ended Slugging Wrenches (Spanners) |
| 653 | IS 4509:1992 | Ring Slugging Wrenches (Spanners) |
| 654 | IS 6149:1984 | Single-ended Open-jaw Adjustable Wrenches |
| 655 | IS 2028:2004 | Open-Jaw Wrenches (Spanners) |
| 656 | IS 2029:1998 | Ring Wrenches (Spanners) |
| 657 | IS 4003 (Part 1): 1978 | Pipe Wrenches –General Purpose |
| 658 | IS 4003 (Part 2): 1986 | Pipe Wrenches – Heavy Duty |
| 659 | IS 3650:1981 | Combination Side Cutting Pliers |
| Indutech | ||
| 660 | IS 15041:2001 | Textiles – Flat woven webbing slings made of man-made fibres for general services |
| Ropes and Cordages | ||
| 661 | IS 1084:2005 | Textiles — Manila Ropes — Specification |
| 662 | IS 11066:2022 | Fibre Ropes — Polyester — 3-, 4-, 8- and 12- Strand Ropes |
| 663 | IS 14928:2001 | Textiles — Composite Synthetic Fibre Ropes — Specification |
| 664 | IS 14929: 2022 | Mixed Polyolefin Fibre Ropes |
| 665 | IS 1804:2004 | Steel wire ropes – Fibre main cores – Specification |
| 666 | IS 4572:2022 | Fibre Ropes — Polyamide — 3-, 4-, 8- and 12- Strand Ropes |
| 667 | IS 5175:2022 | Fibre Ropes — Polypropylene Split Film, Monofilament And Multifilament ( PP2 ) and Polypropylene High-Tenacity Multifilament ( PP3 ) —3-, 4-, 8- and 12- Strand Ropes |
| 668 | IS 8674 : 2013 | Fibre Ropes — Polyethylene —3- And 4-Strand Ropes |
| 669 | IS 17609 : 2021 | Fibre Ropes Of Polyester / Polyolefin dual Fibres |
| Solar Thermal Systems, Devices and Components | ||
| 670 | IS 12933 (Part 1): 2003 | Solar Flat Plate Collector for Solar Water Heating Systems |
| 671 | IS 16544: 2016 | All Glass Evacuated Tubes Solar Water Heating System |
| 672 | IS 16542: 2016 | Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems |
| H Acid , K Acid & Vinyl Sulphone | ||
| 673 | IS 8637 : 2020 | H Acid |
| 674 | IS 11557: 1986 | K Acid |
| 675 | IS 18340 : 2023 | Vinyl Sulphone |
| Electric Fence Energizers | ||
| 676 | IS 302-2-76:1999 | Safety of Household and similar electrical appliances – Part 2 particular requirement Sec 76 electric fence energizers |
| Flashlight | ||
| 677 | IS 2083:2024 | Flashlight – Specification |
| Stainless Steel Pipes and Tubes | ||
| 678 | IS 17875: 2022 | Stainless Steel Seamless pipes and tubes for general service |
| 679 | IS 17876: 2022 | Stainless Steel Welded pipes and tubes for general service |
| Furniture | ||
| 680 | IS 17631: 2022 | Work chairs |
| 681 | IS 17632: 2022 | General purpose chairs and stools |
| 682 | IS 17633: 2022 | Tables and desks |
| 683 | IS 17634: 2022 | Storage units |
| 684 | IS 17635: 2022 | Beds |
| 685 | IS 17636: 2022 | Bunk beds |
| Non-ferrous refined metals | ||
| 686 | IS 2782: 2023 | Refined Nickel |
| 687 | IS 27: 2023 | Primary Lead |
| 688 | IS 209: 2024 | Refined Zinc |
| 689 | IS 26: 2024 | Tin Ingot |